professional CO2 Laser Power Supply
We supply 40W, 50W, 60W, 80W, 100W, 130W, 150W, 180W , 200W CO2 laser power supply.
FEATURES :
- The fixture Mounts was customized for the 40w/50w/60w/80w/100w laser tube,and it can be adjusted according the different tube/Diameter .
- Feature: good aseismatic and stabilit.
- Material: high quality aluminium alloy.
• Input voltage: AC 220V+30 or AC 110V+20 (to be specified when placing order).
• Maximum output voltage:DC25KV/DC28KV/DC35KV/DC40KV
• Maximum output current:DC20mA/DC23mA/DC28mA/DC38mA
• Isolation Withstand voltage: Input-output, input-enclosure: AC2000V-10mA-60s; negative pole of output connected to enclosure
• Protection: with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided).
• Response time (from time of input being available to the output current being up to nominal value): ≤1ms.
• TTL voltage level control: effective voltage level can be high or low through setting
• Protection switch: for detection of cooling water, to protect laser device; or activate with enclosure is opened
• Laser power adjustment: (1) by adjusting the output current of power supply through resistor; (2) through PWM control (magnitude being TTL voltage level)
• Environmental requirements: temperature (-10~ 40℃), relative humidity ≤85%.
